Fluke Biomedical RF303 Electrosurgical Analyzer

Available

RF303RS a very versatile tool for Determining performance of multiple ESU "makes" and models.


$1,500.00

Loyalty program By buying this product you can collect up to 150 loyalty points. Your cart will total 150 points that can be converted into a voucher of $120.00.


7 other products in the same category:

 

Electrosurgery-device testing HAS never been Easier than with the RF303RS. User-selectable loads (50 to 750 Ω), signal averaging, battery power and portability make the RF303RS a very versatile tool for Determining performance of multiple ESU "makes" and models.

STANDARD FEATURES:

      New Signal Averaging Mode (SAMTM)
      New RS232 port
      Battery powered for completely Call Call isolated measurement
      Digital display
      HF-leakage-current measurement

4-digit numeric LCD with backlight and power-save method


Specifications
Modes of Operation
  Line powered, battery powered, offline (battery maintenance charge)
Test Parameters
  Power (W), HF/RF current (mA), test load (O)
Test-Load Selection
  Monopolar and bipolar
Number of Selections: 15
Range: 50 O to 750 O
Step Size: 50 O
Accuracy: ± 4 % of selected value at 500 kHz
Current Measurement (Leakage)
Range: 30 mA to 2500 mA RMS
Resolution: 1 mA
Accuracy: ± 5.0 % of reading or ± 15 mA, whichever is greater (for monopolar cut)
Power Measurement (Output)
Range: 1 to 400 W
Resolution: 0.1 W
Accuracy: ± 10 % of reading or ± 3 W, whichever is greater (for monopolar cut)
Frequency Response
System Response: -3 dB points, 1k Hz to 2M Hz at 300 O
CQM Test
  50 O to 750 O, 50-O steps (See “Test-Load Selection for additional specifications)
Oscilloscope Output
  Transformer coupled output, uncalibrated
  Connector Type: BNC
Battery
Type: Sealed lead-acid
Time Between Recharge: Two hours (continuous use)
Time to Full Charge: Eight hours
Number of Cycles: 200
Top Panel Input Connectors
Connector Type: 4 mm-diameter safety sockets
Input Voltage Limit: 10,000 V peak
Input CurrentLlimit: 3 A RMS
Dimensions
  6 in H x 13.25 in W x 11.5 in D
  (15.2 cm x 33.7 cm x 29.2 cm)
Weight
  14.15 lb (5.6 kg)

 

 

SPECIFICATIONS:
Modes of Operation
  Line powered, battery powered, offline (battery maintenance charge)
Test Parameters
  Power (W), HF/RF current (mA), test load (O)
Test-Load Selection
  Monopolar and bipolar
Number of Selections: 15
Range: 50 O to 750 O
Step Size: 50 O
Accuracy: ± 4 % of selected value at 500 kHz
Current Measurement (Leakage)
Range: 30 mA to 2500 mA RMS
Resolution: 1 mA
Accuracy: ± 5.0 % of reading or ± 15 mA, whichever is greater (for monopolar cut)
Power Measurement (Output)
Range: 1 to 400 W
Resolution: 0.1 W
Accuracy: ± 10 % of reading or ± 3 W, whichever is greater (for monopolar cut)
Frequency Response
System Response: -3 dB points, 1k Hz to 2M Hz at 300 O
CQM Test
  50 O to 750 O, 50-O steps (See “Test-Load Selection for additional specifications)
Oscilloscope Output
  Transformer coupled output, uncalibrated
  Connector Type: BNC
Battery
Type: Sealed lead-acid
Time Between Recharge: Two hours (continuous use)
Time to Full Charge: Eight hours
Number of Cycles: 200
Top Panel Input Connectors
Connector Type: 4 mm-diameter safety sockets
Input Voltage Limit: 10,000 V peak
Input CurrentLlimit: 3 A RMS
Dimensions
  6 in H x 13.25 in W x 11.5 in D
  (15.2 cm x 33.7 cm x 29.2 cm)
Weight
  14.15 lb (5.6 kg)

 

 

SPECIFICATIONS:
Modes of Operation
  Line powered, battery powered, offline (battery maintenance charge)
Test Parameters
  Power (W), HF/RF current (mA), test load (O)
Test-Load Selection
  Monopolar and bipolar
Number of Selections: 15
Range: 50 O to 750 O
Step Size: 50 O
Accuracy: ± 4 % of selected value at 500 kHz
Current Measurement (Leakage)
Range: 30 mA to 2500 mA RMS
Resolution: 1 mA
Accuracy: ± 5.0 % of reading or ± 15 mA, whichever is greater (for monopolar cut)
Power Measurement (Output)
Range: 1 to 400 W
Resolution: 0.1 W
Accuracy: ± 10 % of reading or ± 3 W, whichever is greater (for monopolar cut)
Frequency Response
System Response: -3 dB points, 1k Hz to 2M Hz at 300 O
CQM Test
  50 O to 750 O, 50-O steps (See “Test-Load Selection for additional specifications)
Oscilloscope Output
  Transformer coupled output, uncalibrated
  Connector Type: BNC
Battery
Type: Sealed lead-acid
Time Between Recharge: Two hours (continuous use)
Time to Full Charge: Eight hours
Number of Cycles: 200
Top Panel Input Connectors
Connector Type: 4 mm-diameter safety sockets
Input Voltage Limit: 10,000 V peak
Input CurrentLlimit: 3 A RMS
Dimensions
  6 in H x 13.25 in W x 11.5 in D
  (15.2 cm x 33.7 cm x 29.2 cm)
Weight
  14.15 lb (5.6 kg)


 

No customer comments for the moment.

Only registered users can post a new comment.

Cart  

product (empty)